XLe Pump Controller

XLe Screens

The default screen of the XLe pump controller shows :
  *  The pump status and controller mode. (Pressure Limit, Flow Limit, Depth Limit)
  *  The measured Pressure (Bar
  *  The measured Flow (L/S)
  *  The Total volume pumped  (CuM)
  *  The Pump Temperature (Emotron FDU and Danfoss FC202 with option cards fitted only)

Screen 2 shows :
  *  Pump Status
  *  Frequency (Hz)
  *  Current  (Amps)
  *  Power  (KW)
  *  Pressure (Bar)

Screen 3 shows :
  *  Pump Status
  *  Height of water above the pump. (Meters)

Screen 4 shows :
  *  Pump Status
  *  Water Level (Meters below the surface)
  *  Water above the Pump.

Screen 5 shows :
  *  Graph of Pressure, Flow and Water above Pump in one second steps out to 112 seconds.

Screen 6 shows :
  *  Graph of Pressure, Flow and Water above Pump in one minute steps out to 112 minutes.

​Screen 7 shows :
  *  Graph of Pressure, Flow and Water above Pump in one hour steps out to 112 hours.

Screen 8 shows :
  *  Graph of Pressure, Flow and Water above Pump in one day steps out to 112 days.